Plain & finned tube device
Keep your head cool and avoid changing into hot beneath the collar
Dirty gas causes deposits on device tubes therefore reduces heat transfer and increase pressure loss. each effects have a damaging impact on in operation prices. If the gas is clean, tubes with finned surfaces are often used. This considerably reduces the price of investment. T.S. Industrial helps you create the proper choice!
Heat exchangers with plain tubes square measure appropriate for dirty gases on the shell aspect. By selecting the right size, layout and pitch of tubes, the warmth money dealer is intended to utterly match client necessities. In systems with finned tubes, the affiliation between the core tube and fin is incredibly vital. variety of various systems square measure on the market, looking on the temperature and selection of materials. By exploitation floating tube sheets or U-tubes it's attainable to make sure that the bundle isn't subject to thermal stress. On the tube aspect it's attainable to use gases, steam or liquids. it's additionally attainable to suit tube inserts (e.g. swirls). These enhance the turbulence of the flow.
We will offer you with the foremost appropriate resolution in every case.
Plain-tube heat exchanger:
Application areas
• method business
• drying idustry
• industry
• power generation
• heating, ventilation and air con business
Product characteristics:
• compact fin tube systems
• hot-galvanised oval fin tubes
• spiral wound finned tubes
• extruded spiral finned tubes
• welded spiral finned tubes
Finned tube heat exchanger:
Application areas
• air pre-heater for waste combustion plants
• coolers and heaters for applications within the chemical and method industries
• economisers (energy offer, environmental technology)
Product characteristics
• straight or U-shaped tubes, looking on application
• with or while not water and outlet cones
Operating vary and size
• tube side: vacuum operation up to 80 bar
• shell side: up to one barg
• temperature: up to 1’000 °C
• component width: up to three m
• component length: up to ten m looking on tube system
Materials
• steel
• 1.4307, 1.4541, 1.4404, 1.4539, 1.4571, 1.4828 etc.
• steel, extremely alloyed quality, such as 1.4539
• heat-resistant quality, e.g 1.4828, 1.4841, 1.4878 etc.
• non-ferrous metals like metal, CuNi10Fe, CuNi30
• aluminum
• duplex steel
• atomic number 22
• nickel alloys
Key Words: Finned Tube, Fin Tubes, Extruded Fin Tubes, Embedded Fin Tube, L Fin tube, Tubos Aletados